+i1Pro / i1Pro2 Upgrade and Dongle Transfer Procedure
Upgrading and Dongle (license) Transfer procedure for the i1Pro / i1Pro 2 is available in i1Profiler v.1.3.
An i1Pro can be upgraded from legacy X-RITE software or from a i1Basic Pro to fully licensed i1Profiler.
With v1.3 you can also transfer licenses from an i1Pro to the new i1Pro 2.
To upgrade an i1Pro, 1) Launch i1Profiler:
Step 2) Connect old i1Pro and press the "Upgrade License" button
Step 3a) Enter the Upgrade code that ships with the EO2BAS-UPGAA and EO2BAS-UPGB packages into
the "Upgrade License" window and fill our the registration information.
Step 3b) If the server connection is not available switchto manual activation and call X-RITE. The Support team
can create a manual activation license.
Step 4a) or Step 4b) Hit the "Activate" button to upgrade the license file in the old i1Pro
Step 5) Wait for activation confirmation message and close message box and upgrade window
Step 6) i1Profiler is fully Licensed now. The License is held by the old i1Pro.
Step 7) Press "Transfer License" button
Step 8a) Connect i1Pro (Basic) to the second USB port and push the "Transfer" button.
Step 8b) If Server connection fails call X-RITE Service Center for a manual license code, enter and press "Transfer"
Step 9) License are swapped between instruments. The i1Pro 2 is now fully licensed and the old i1Pro has the licenses that
used to be on the i1Pro 2. Note that any i1Match licenses are also transfered.