X-Rite photo

Date Created: 8/20/2004   Date Modified: 5/19/2016

-Resetting the DTP20 "Pulse" Spectrophotometer

The following procedure resets your instrument to the factory default settings.

  1. Disconnect the instrument from the computer and power adapter (if applicable).

  2. With the instrument in the power down mode, press and hold the Operation button.

  3. Slide the power switch at the back of the instrument to the on (right) and then release.

  4. Release the Operation button. The indicator light flashes green and then returns to a solid green. The factory defaults are reset and the instrument is ready to read.

After completing the reset procedure the instrument should be calibrated.

Note:  The procedure described above does not erase measurements that may already be stored in the instrument's memory.  Click here to review the process for clearing stored data.